Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Alameda, CA
We clean, repair, and seal Lennox ducted systems throughout Alameda, including Berkeley Lennox service, and we’re an independent service provider, not a Lennox dealer or authorized affiliate. The work we do here on the island is shaped by something most duct companies never mention: Alameda’s marine air and pre-1940 housing stock mean your Lennox system is pulling damp, salty bay air through returns that were never designed to handle it. If your Lennox furnace or air handler pushes a musty smell through the vents, call us at (833) 467-6681. We’ll find where the moisture is getting in and fix it at the source.
Why Alameda Residents Choose Us for Lennox Service
Nelson Briggs grew up in Oakland’s Fruitvale neighborhood, where he first saw the need for Lennox repair in Oakland, and learned the fundamentals of HVAC through the building trades program at Laney College. He’s spent the better part of two decades working on duct systems across the East Bay, and he’s the person neighbors call when an older home’s ductwork hasn’t been touched since the original install. Our crew has pulled, cleaned, and re-sealed Lennox ducted systems across Alameda’s older housing stock for years, so we know the Signature, Elite, and Merit equipment and their duct interfaces on sight. We show up with professional-grade Rotobrush and Nikro extraction systems, matched to the duct type and contamination level rather than running the same tool through every home. Abatement Technologies negative-air equipment contains what we dislodge, so the dust and mildew don’t get redistributed through your living space. And when a Lennox system needs more than cleaning, we handle air duct repair in-house, which most cleaning-only companies can’t offer.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Alameda
- Mildew on evaporator coils in Gold Coast and Bronze Coast crawlspaces. Lennox indoor air handlers and coil cases sitting in damp crawlspaces collect condensation that never fully dries. The marine layer keeps those spaces humid nearly year-round, and we routinely find mildew on the evaporator coil and cabinet liner. Cleaning the coil restores airflow and kills the musty smell at its source.
- Corroded blower wheels from salty bay air in unlined returns. Older Lennox furnaces tied into original unlined return plenums pull salty, damp air from the crawlspace straight through the return. That air leaves corrosion on blower wheels and cabinet seams, which shortens the life of the blower motor. We clean the blower assembly and seal the return path so that air stops coming from the soil.
- Sagging flex-duct takeoffs in Bay Farm Island condos. Lennox systems in 1970s-90s tract and condo construction on Bay Farm Island often use flex duct that sags and separates at the collar over time. When that happens, airflow drops and the supply run starts pulling attic or garage air into the conditioned space. We reconnect and seal the collar, then clean the full run.
- Cracked mastic seals on original metal trunk transitions. In 1920s-40s bungalows across 94501, early galvanized ductwork is taped and mastic-sealed at joints that have dried and cracked after decades. We find air leaks bleeding humidity into the duct run, which is why the air feels damp even when the Lennox system runs. Resealing those joints keeps the humidity out.
- Musty smells that owners blame on the furnace but are actually the return path. This is the most common call we get in Alameda. The furnace gets blamed, but the smell is almost always bay air coming up through an unlined return plenum. We trace the return, find the opening, and seal it before the air ever reaches the Lennox air handler.
Lennox Service in Alameda: What Local Conditions Mean for Your Equipment
In Alameda’s pre-1940 Gold Coast and Bronze Coast Victorians, we regularly trace a Lennox return duct back to an unlined plenum that opens straight onto damp crawlspace soil. The musty smell owners blame on the furnace is actually bay air coming up through the return. Off Grand Street, an owner called about a musty smell whenever the Lennox SLP98V furnace kicked on. We video-inspected the return and found it tied into an unlined pre-war plenum drawing damp soil air up from the crawlspace, with mildew on the evaporator coil and blower wheel. We cleaned the return and supply runs, treated and cleaned the coil and blower, then mastic-sealed the plenum seams and reconnected the run. The odor cleared within a day. That’s the difference on Alameda: the fix isn’t just cleaning the ducts, it’s finding where the island’s damp air is entering the system and closing that opening. A generic duct cleaning that vacuums the registers and leaves won’t touch it.
Lennox Models & Products We Service in Alameda
We work on the full Lennox residential lineup, including Signature Collection gas furnaces like the SLP98V and SL280V, Elite Series furnaces and air handlers like the EL296V and EL180, Merit Series furnaces including the ML180 and ML193, and 14ACX and 16ACX air conditioners paired with indoor air handlers. On the parts side, we use OEM Lennox components where fit and warranty matter: coil case gaskets, cabinet panels, blower components. For flex duct, mastic, and sealants, quality aftermarket product meets or exceeds the factory spec. We recommend repair over replacement unless the coil case or cabinet is rusted through, in which case we tell you straight. For broader Lennox equipment needs beyond duct work, see our Lennox sales & service page.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Alameda
Lennox air duct cleaning in Alameda typically runs from $340 to $650 for a whole-system cleaning, depending on the home’s square footage, the number of returns, and how much contamination has built up. Homes with unlined crawlspace returns often land on the higher end because the coil and blower need treatment along with the ducts. When duct sealing or return replacement is needed, we scope that separately and give you a number before any work starts. Every estimate includes a video inspection of the return path and a written quote with no per-vent pricing games. For an exact quote on your Lennox system, call (833) 467-6681.
Serving Alameda, CA – Our Local Coverage Area
We’re based in the Alameda area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Alameda
Will cleaning my ducts void my Lennox warranty? No. Duct cleaning by an independent contractor does not void your Lennox equipment warranty. The warranty covers the furnace, air handler, and coil, not the ductwork itself. What we do is clean and seal the air delivery system around that equipment, which actually helps the equipment run within spec.
Can you clean the Lennox air handler and coil even if the ducts are fine? Yes. We offer evaporator coil cleaning and air handler cleaning as standalone services in Alameda. If your ducts are in good shape but the coil is mildewed or the blower is gummed up, we clean those components without selling you a full duct job. It’s a common call on the island, where crawlspace humidity takes a toll on coils even in homes with clean ductwork.
Are you authorized by Lennox? No. We’re an independent shop, not authorized, affiliated with, or endorsed by Lennox. We say so plainly because it matters. What we bring is hands-on familiarity with Lennox duct interfaces, OEM parts where they matter, and a repair-over-replace stance that an independent can offer without a sales quota attached.
How long does Lennox duct cleaning take in Alameda? Most Alameda homes run three to five hours for a full system clean, including return and supply runs, evaporator coil, and blower. Homes with unlined crawlspace returns that need sealing take longer. We’ll give you a time window when we scope the job, and we don’t rush the containment process.
Why are some Alameda duct cleaning quotes so much cheaper? The low quotes in this market usually mean a quick vacuum through the registers, no negative-air containment, and no coil or blower work. On Alameda, where the real problem is often the return path pulling damp bay air, that kind of cleaning misses the actual source. Call (833) 467-6681 for a quote that covers the whole system, not just the visible parts.
Service Areas Near Alameda
Beyond Alameda itself, our Lennox duct work regularly takes us into Oakland, Piedmont, Berkeley, and Richmond. Each area has its own housing stock and duct patterns, and we adjust the equipment and approach accordingly. For specifics on those areas, see our Alameda service area page, Lennox service in Piedmont, and Lennox service in Richmond.
Book Your Lennox Service in Alameda Today
If your Lennox system smells musty, pushes weak airflow, or hasn’t had the ducts touched since the original install, call (833) 467-6681. We’ll video-inspect the return path, show you what’s actually in there, and quote you one flat price for the whole system before any work starts. Clean ducts don’t announce themselves, you just breathe easier and wonder why you waited.
Written by Nelson Briggs, Owner at Hallmark Air Duct Cleaning, serving Alameda and the East Bay.